TM 10-3930-659-20 6-5. FAULT MONITOR MODULE REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Conditions: Materials/Parts: • Battery disconnect switch in OFF position (see   •  Marker tags (Item 33, Appendix C) TM 10-3930-659-10). •  Three gaskets Tools/Test Equipment: References: • General mechanic's tool kit (Item 44, Appendix F) * TM 10-3930-659-10 a. REMOVAL NOTE All connectors should be tagged before removal.  Refer to paragraph 2-18 for tagging Instructions. 1. Remove four screws (2) and lift dash plate (6) from dash housing (1). 2. Remove four nuts (3), screws (4), and fault monitor console (5) from dash plate (6). 3. Place dash plate (6) back in original position against dash housing (1). TA707712 6-19