TM 10-3930-659-20 5-26. FUEL INJECTION PUMP STATIC TIMING ADJUSTMENT. This task covers:  Adjustment INITIAL SETUP: Equipment Conditions: Materials/Parts: •    Battery disconnect switch in OFF position (see • One gasket TM 10-3930-659-10). •    Conveyorized fork attachments removed from     Personnel Required:  Two side of forklift truck (see paragraph 17-13). •    Right and left engine upper sideshields opened (see References: TM 10-3930-659-10). • TM 10-3930-659-10 Tools/Test Equipment: •    General mechanic's tool kit (Item 44, Appendix F) •    Flywheel turning tool (Item 16, Appendix F) •    Timing pin (Item 42, Appendix F) •    Torque wrench, 0-175 lb.-ft.  (Item 52, Appendix F) ADJUSTMENT 1. Remove plugs (3 and 4) from engine (1). 2. If damaged, remove performed packing (2) from plug (3).  Discard performed packing. TA706899 5-75