| |
TM 10-3930-659-20
5-16.
BLEEDING FUEL FILTER AND LINES.
This task covers: Bleeding
INITIAL SETUP:
Equipment Conditions:
Materials/Parts:
• Battery disconnect switch in OFF position (see
•
Rags (Item 27, Appendix C)
TM 10-3930-659-10).
• Left engine upper sideshield opened (see TM 10-
References:
3930-659-10).
•
TM 10-3930-659-10
Tools/Test Equipment:
• General mechanic's tool kit (Item 44, Appendix F)
General Safety Instructions:
• DO NOT perform this procedure near fire, flames, or sparks.
WARNING
Diesel fuel is combustible. DO NOT smoke or allow open flame near fuel filter.
Failure to follow this warning will result in death or serious Injury to
personnel. If you are burned, Immediately seek medical aid.
NOTE
A suitable container should be used to catch any draining fuel. Ensure that all
spills are properly cleaned.
BLEEDING
1.
Loosen bleed screw (1).
2.
Operate primer lever (2) until fuel flow from bleed screw (1) is free of air bubbles.
3.
Tighten bleed screw (1).
4.
Push primer lever (2) toward engine (3).
5-48
|