| |
TM 10-3930-659-20
5-15. FUEL LINES AND FITTINGS REPLACEMENT.
This Task Covers:
a. Fuel Tank-to-Fuel Transfer Pump Fuel Line and
e.
Fuel Filter Housing-to-Fuel Pressure Transducer
Fittings Replacement
Fuel Line and Fittings Replacement
b. Fuel Transfer Pump-to-Fuel Filter Housing Fuel
f.
Fuel Filter Housing-to-Fuel Injection Pump Fuel
Line and Fittings Replacement
Line and Fittings Replacement
c. Fuel Filter Housing-to-Fuel Pressure Differential
g.
Fuel Injection Pump-to-Fuel Tank Fuel Line and
Switch Fuel Line and Fittings Replacement
Fittings Replacement
d. Fuel Filter Housing-to-Fuel Primer Pump Fuel Line h.
Fuel Tank Vent Line Replacement
and Fittings Replacement
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Conveyorized fork attachments removed from side of
•
Rags (Item 27, Appendix C)
forklift truck (see paragraph 17-13).
• Right and left engine upper sideshields opened (see
References:
TM 10-3930-659-10).
• Battery cables disconnected (see paragraph 6-43).
•
TM 10-3930-659-10
• Left engine lower sideshield removed (see para-
General Safety Instructions:
graph 14-16).
Tools/Test Equipment:
• DO NOT perform this procedure near fire, flames,
or sparks.
• General mechanic's tool kit (Item 44, Appendix F)
WARNING
Diesel fuel Is combustible. DO NOT smoke or allow open flame near fuel lines.
Failure to follow this warning will result In death or serious Injury to
personnel. If you are burned, immediately seek medical aid.
NOTE
A suitable container should be used to catch any draining fuel. Ensure that all
spills are properly cleaned.
a.
FUEL TANK-TO-FUEL TRANSFER PUMP FUEL LINE AND FITTINGS REPLACEMENT
1.
Remove fuel line (5) from fitting (4) and elbow (6).
5-40
|