| |
TM 10-3930-659-20
5-4.
ENGINE OIL FILLER NECK REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Battery disconnect switch in OFF position (see
• One gasket
TM 10-3930-659-10).
•
Left engine upper sideshield opened (see TM 10-
References:
3930-659-10).
• TM 10-3930-659-10
Tools/Test Equipment:
•
General mechanic's tool kit (Item 44, Appendix F)
a.
REMOVAL
1.
Remove cap (9) from engine oil filler neck (7).
2.
If damaged, remove gasket (8) from cap (9).
Discard gasket.
3.
Remove screw (4) and washer (3) from engine
oil filler neck (7).
4.
Remove screw (5) and bracket (6) from engine
oil filler neck (7).
5.
Remove engine oil filler neck (7) and gasket (1)
from engine timing gear cover (2). Discard
gasket.
b.
INSTALLATION
1.
Position new gasket (1) and engine oil filler neck
(7) on engine timing gear cover (2), and install
bracket (6) with screw (5).
2.
Install washer (3) and screw (4) on engine oil
filler neck (7).
3.
If removed, install new gasket (8) on cap (9).
4.
Install cap (9) on engine oil filler neck (7).
FOLLOW-ON TASKS:
•
Close left engine upper sideshield (see TM 10-3930-659-10).
TA706852
5-11
|
