TM 10-3930-659-20 18-5. ENGINE OIL PAN HEATER, THERMOSTAT, AND CABLE REPLACEMENT (Con't). 3. Remove connector (4) from thermostat (5). 4. Remove thermostat (5) from engine oil pan (1). 5. Remove engine oil pan heater and thermostat cable (3) from 11 0-volt junction box (6) and remove engine oil pan heater and thermostat cable from forklift truck. b. INSTALLATION 1. Position engine oil pan heater and thermostat cable (3) on forklift truck. NOTE Install new tie-down straps as necessary. 2. Install engine oil pan heater and thermostat cable (3) on 110-volt junction box (6). 3. Install thermostat (5) on engine oil pan (1). 4. Install connector (4) on thermostat (5). 5. Install engine oil pan heater (2) on engine oil pan (1). 6. Install engine oil pan heater and thermostat cable (3) on engine oil pan heater (2). FOLLOW-ON TASKS: • Fill engine with engine oil (see LO 10-3930-659-12). • Close right engine upper sideshield (see TM 10-3930-659-10). • Install conveyorized fork attachments on side of forklift truck (see paragraph 17-13). TA706779 18-11/(18-12 Blank)