TM 10-3930-659-10 2-18.  REMOVE AND INSTALL CONVEYORIZED FORK ATTACHMENTS (Con’t). c.  Reverse Conveyor Tips. NOTE Tips     of     conveyorlzed     fork     attachments     can     be     reversed     to accommodate  operational  requirements.    One  side  of  conveyor  tip has a rubber bumper; the other side has a hard, tapered edge. (1) Raise forks (1) enough to gain access to bottom surface of conveyorized fork attachment (5). (2) Remove two retaining rings (7) from pin (6). (3) Remove pin (6) from conveyorized fork attachment (5). (4) Pull conveyor tip (8) out of end of conveyorized fork attachment (5). (5) Insert conveyor tip (8) into end of conveyorized fork attachment (5) and line up hole for pin (6). (6) Install pin (6) into conveyorized fork attachment (5) and conveyor tip (8). (7) Install two retaining rings (7) into pin (6).  Fold over loop of each retaining ring to hold retaining rings in place. 2-54