TM 10-3930-659-10 CHAPTER 1 INTRODUCTION Section I.  GENERAL INFORMATION 1-1.  SCOPE. a.  Type of Manual.  Operator’s Manual. b.  Equipment Name and Model Number.  Truck, Forklift: Adverse Terrain,  10, 000 Lb Capacity, M544E. c.    Purpose  of  Equipment.    The  forklift  truck  is  designed  for  conventional  loading  and  unloading  or  stacking  and unstacking of suitably packaged materiel. 1-2.  MAINTENANCE FORMS AND PROCEDURES. Department of the Army forms and procedures used for the equipment will be those prescribed by DA Pam 738-750, The Army Maintenance Management System (TAMMS) Maintenance Management. 1-3.  CORROSION PREVENTION AND CONTROL. a.  Corrosion Prevention and Control (CPC) of Army materiel is a continuing concern.  It is important that any corrosion problems with this item be reported so that the problem can be corrected and improvements can be made to prevent the problem In future items. b.  While  corrosion  Is  typically  associated  with  rusting  of  metals,  it  can  also  include  deterioration  of  other  materials, such  as  rubber  and  plastic.    Unusual  cracking,    softening,  swelling,  or  breaking  of  these  materials  may  be  a  corrosion problem. c.  If a corrosion problem is identified, it can be reported using SF Form 368 (Product Quality Deficiency Report).  Use of key words such as "corrosion, " "rust, " "deterioration, " or "cracking" will ensure that the information is identified as a CPC problem.  The form should be submitted to the address specified in DA Pam 738-750. 1-4.  DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE. For destruction of Army materiel to prevent enemy use, refer to TM 750-244-3. 1-1