| |
TM 10-3930-653-14&P
BRAKE SYSTEM
Checking Item
Service Required
Daily
Monthly
{100 hrs)
Semiannually
(600 hrs)
Annually
(1200 hrs)
Back Plate
Check back plate for deformation
‰
Check for cracks
‰
Check mounting parts for looseness.
‰
LOADING SYSTEM
Checking
Item
Service Required
Daily
Monthly
(100 hrs)
Semiannually(6
00 hrs)
Annually
(1200 hrs)
Fork
Check forks for damage, deformation or wear.
‰
‰
‰
‰
Check for stopper pins for damage or wear.
‰
‰
Check fork base and hook weldings for defective
cracks or wear.
‰
‰
‰
Mast
&
Lift
Bracket
Check cross members on outer and inner.
‰
‰
‰
masts for defective weld, cracks or damage.
‰
‰
‰
Check tilt cylinder bracket and mast for defective weld,
cracks or damage.
‰
‰
‰
Check outer and Inner masts for defective weld, cracks
or damage.
‰
‰
‰
Check for defective weld, cracks or damage of lift
bracket.
‰
‰
‰
Check roller bearings for looseness.
‰
‰
‰
Check mast support bushings for wear or damage.
‰
Check mast support cap bolts for looseness.
‰
(for 1st time
only)
‰
‰
Check rollers, roller pins and welded parts.
for cracks or damage.
‰
‰
‰
LOADING SYSTEM
Checking
Item
Service Required
Daily
Monthly
(100 hrs)
Semiannually
(600 hrs)
Annually
(1200 hrs)
Chains &
Sheave
Check chains for tension, deformation, damage or
rust.
‰
‰
‰
‰
Lubrication of chains.
‰
‰
‰
Check connection of chain anchor pin and chain for
looseness.
‰
‰
‰
Check sheaves for deformation or damage.
‰
‰
‰
Check sheave bearings for looseness.
‰
‰
‰
Optional
Attachment
Perform general inspection.
‰
‰
‰
Cylinders
Check piston rod, rod screw and rod end for
looseness, deformation or damage.
‰
‰
‰
‰
Check cylinders for proper operation.
‰
‰
‰
‰
Check for oil leaks.
‰
‰
‰
‰
Check pins and cylinder bushings for wear or damage.
‰
‰
‰
Hydraulic
Pump
Check hydraulic pump for oil leaks or noise.
‰
‰
‰
‰
Check pump drive gear for wear.
‰
‰
‰
HYDRAULIC SYSTEM
Checking
Item
Service Required
. Daily
Monthly
(100 hrs)
Semiannually
(600 hrs)
Annually
(1200 hrs)
Hydraulic
Reservoir
Check for oil level. Change oil.
‰
‰
‰
l
Clean suction strainer. Drain foreign matter.
‰
‰
Return Filter
Replace return filter.
l
Control Lever
Check levers for looseness at link.
‰
‰
‰
‰
Check for proper operation.
‰
‰
‰
‰
3-11
|