TM 10-3930-653-14t&P FAN BELT TENSION CHECK Check  the  fan  belts  for  correct tension and damage. The  deflection  of  the  belts  when  the  midpoint  between the    water    pump    pulley    and    the  generator  pulley  is pushed  by  the  thumb  is  about  10  to  15  mm  (0.4  to  0.6 in.). WARNING Fan belt deflection check  should |be made with engine shut down. Close the hood... Take care not to catch your finger in the hood. DRIVER’S SEAT ADJUSTMENT Make  sure  the driver’s seat  is properly located.  If not, shift the adjusting lever to the right and move the  driver’s seat to a position which provides easy access to all hand and feet  controls.  After  adjustment,. shake the driver’s seat a little to be sure that it is securely locked. SHIFT LEVER CHECK Check the shift lever(s) for looseness and operation. LOADING LEVERS CHECK Check    the    loading    levers    (for    lift,    tilt        &        optional attachment)  for looseness and smooth operation. PARKING BRAKE OPERATION CHECK Make  sure that the parking brake is securely applied  by operating  the  parking  brake  lever.    Under  the  normal conditions,  the  parking  brake  gets  applied  after  5  to  9 clicking sounds are heard. Start the engine.. NOTE:      Before    starting  the  engine  make  certain  the shift  lever(s)  is  in  neutral  and  parking  brake  is  securely applied. WARNING LAMPS When  the  starter  switch  is  turned  ON,  warning  lamps (OIL 8 CHG) come on. These lamps go off soon after the engine is started. 3-4