| |
TM 10-3930-653-14&P
WARNING
Exercise care when removing snap rings.
(23) Install snap ring on the pipe.
(26) Install reverse idle gear in transmission case.
Fig. 4-380.
Fig. 4-383.
(24) Install O-ring on strainer flange section.
(27) Install clutch pack in transmission case.
Fig. 4-381.
Fig. 4-384.
(25) Install ball bearing on reverse idle gear.
(28) -Put packing on transmission case.
Fig 4-382.
Fig 4-385.
4 - 183
|