TM 10-3930-653-14&P REASSEMBLY OF TORQUE CONVERTER HOUSING (1)   Install O-ring on bearing cage. Fig. 4-322. (2)   Install bearing cage in torque converter housing. Do not forget to install the steel ball between bearing cage and torque converter housing. Fig. 4-323. (3) Install ball bearing on reverse idle gear. Fig. 4-324. (4)   Fit snap ring on reverse idle gear. Fig. 4-325. (5)   Install reverse idle gear in torque converter housing. Fig. 4-326. (6)   Install ball bearing on output gear. Fig. 4-327. 4-172