| |
TM 10-3930-653-14&P
(3) Remove regulator spring and piston. It is good
practice to use a round bar whose end is threaded
(M6-P1), as shown in Fig. 2-88 when removing
piston.
Fig. 4-277.
(4) Using a round bar of 5 mm (0.197 in) diameter,
remove roll pin.
Fig. 4-278.
(5) Remove stopper.
Fig. 4-279.
(6) Remove shift arm and shift rod.
Fig. 4-280.
4-158
|
