TM 10-3930-653-14&P WARNING Exercise   care   when   removing   snap rings. (5)  Remove snap ring securing spring. Fig. 4-255. (6)  Remove spring retainer and spring. Fig. 4-256. (7)  Remove piston. Fig. 4-258. (8)  Remove seal ring from shaft. Fig. 4-259. (9)        Disassemble    reverse    side    clutch,    using    the    same procedure as with forward side one. Fig. 4-257. 1.  Piston seal ring for outer circumference 2.  Spring 3.  Spring retainer 4.  snap ring 5.  snap ring 6.  Seal ring 7.  Clutch disk 8.  Piston seal ring for inner circumference 9.  Piston 10.  Thrust washer 11. Forward gear 12.  Thrust washer 13.  Ball bearing 4-154