| |
TM 10-3930-653-14&P
8. DIFFERENTIAL
Unit mm (in)
Checking Item
Standard Value
Service Limit
Deflection of ring gear back face
0.05 (0.002)
---
Tightening bolt torque of ring gear and cross case:
4.8-6.4
---
kg-m (ft-lbs)
(34.7-46.3)
I.D. of side gear fitting part on cross case
54.00-54.03
---
(2.126-2.127)
Clearance between side gear and drive shaft splines in
0.04-0.10
---
rotational direction
(0.0016-0.004)
I.D. ef pinion gear
22.01-22.05
---
(0.867-0.868)
O.D. of pinion shaft
21.99-22.00
---
(0.8658-0.8661)
Bearing cap tightening bolt torque: kg-m (ft-lbs)
9.2-10.8 (66.5-78.1)
---
Backlash of side gear and pinion gear
0.15-0.25 (0.006-0.01)
---
78.513-78.583
78.363
Displacement over seven (7) teeth of ring gear
(3.0915 3094)
(3.085)
Looseness of ball bearing at each side of cross case
---
0.2 (0.008)
Ring gear fitting surface deflection of cross case
0.05 (0.002)
---
Pinion gear thrust plate thickness
6.0 (0.236)
---
Pinion gear thrust plate thickness (replacement part)
5.8, 6.2, 6.4
---
(0.228, 0.244, 0.252)
Side gear thrust plate thickness
2.0 (0.079)
---
Side gear thrust plate thickness (replacement part)
1.8, 2.2, 2.3
---
(0.071, 0.866, 0.906)
9. OTHERS
Unit: mm (in)
Checking Item
Standard Value
Service Limit
Clutch regulator valve pressure setting:
kg/cm2 (psi)
11-14 (156.5-199)
---
Torque converter regulator valve pressure setting:
kg/cm2 (psi)
5.5-6.8 (78.2-96.7)
---
4-124
|