| |
TM 10-3930-653-14&P
Checking item
Standard Value
Service Limit
F30.2 x 2.5 x 1.3
Dimensions of clutch shaft seal ring:
(1.189 x 0.098 x 0.051)
Outer dia. x width x thickness
R30.2 x 2.46 x 1.6
---
(1.189 x 0.097 x 0.063)
I.D. of clutch drum
122.00-122.05
---
(4.8034.805
Backlash of drive plate and gear spline
0.09-0.25 (0.0035-0.01)
Clutch shaft ball bearing looseness
Less than 0.2 (0.008)
More than 0.2 (0.008)
Clutch shaft roller bearing looseness
Less than 0.2 (0.008)
More than 0.2 (0.008)
4. CONTROL VALVE
Unit: mm (in)
Checking Item
Standard Value
Service Limit
O.D. of change spool
24.959-24.980
---
(0.983-0.984
Clearance between change spool and valve body
---
0.1 (0.004)
O.D. of regulator spool
17.959-17.980
---
(0.707-0.708)
Clearance between regulator spool and valve body
---
0.1 (0.004)
Outside regulator spring:
Free length
101.5 (4)
---
Setting length
91 (3.59)
---
Setting load; kg/mm (lbs/in)
9/56 (19.9/2.205)
8.1/56 (17.9/2.205)
Inside regulator spring:
Free length
118.8 (4.677)
---
Setting length
108 (4.25)
---
Setting load; kg/mm (lbs/in)
11.9/90 (26.2/3.54)
10.7/90 (23.6/3.54)
Cover fitting bolt torque:
kg-cm (ft-lbs)
120-150 (8.7-10.9)
---
Detent body tightening torque:
kg-cm (ft-lbs)
200-250 (14.5-18.1)
---
4-122
|
