TM 10-3930-653-14&P 4-7-3-3. REMOVAL AND INSTALLATION (1) Disconnect battery ground cable. (2) Disconnect starting motor wires. (3) Remove two starting motor retaining bolts. (4) Remove starting motor. (5) To    install    starting    motor,    reverse    the    order    of removal. 4-7-3-4. DISASSEMBLY (1) Remove  nut  (1)  retaining  terminal  M  to  magnetic switch  and  remove  magnetic  switch  attaching  screws. (2) Then remove magnetic switch assembly. (3) Fig. 4-153.  Removing Magnetic Switch (2) Extract  two  through  bolts  and  separate  yoke  from armature together with front bracket. Fig. 4-154.  Removing Yoke Assembly (3) Carefully   remove   armature   and   lever   from   front bracket. Note Be sure to remember installation direction of lever. Fig. 4-155.  Removing Armature Assembly and Shift Lever (4) Remove two screws and remove rear cover. Fig. 4-156.  Removing Rear Cover 4-95