ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES

TM 10-3930-644-14&P

ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES

Q-Quarterly

S-Semiannually

A-Annually

B-Biennially

H-Hours

M-Miles

ITEM NO

INTERVAL

ITEM TO BE INSPECTED

PROCEDURE: Check for and have repaired, filled, or adjusted as needed

NOTE: Adjust engine valve clearance after first 50 hours of operation.

NOTE

Perform Operator/Crew PMCS prior to or in conjunction with organizational PMCS if:-

a. There is a delay between the daily operation of the equipment and the

organizational PMCS.

b. Regular operator is not assisting/participating.

100

MAST ASSEMBLY

a. Lubricate sliding and roller contact surfaces.

b. Clean and inspect lift chains for bent or cracked links. Check adjustment

and lubricate.

c. Tighten top mast bolt to 135 ft. lbs. torque.

100

BATTERY

Inspect/service electrolyte level and charge as required. Check that cables

are secure and clean (reference TM 9-6140-200-12).

100

ENGINE

a. Drain engine oil, replace oil filter and refill with five quarts (see

Appendix E).