Appendix E. MAINTENANCE AND OPERATING SUPPLY LIST

TM 10-3930-644-14&P

EXPECTED TEMPERATURES

LUBRICANTS

CAPACITY

Above 32 F

+40 F to -10 F

0 F to -65 F

Above 0 C

+5 C to -23 C

-18 C to -50C

INTERVALS

OE/HDO , Engine, Heavy Duty

OE/HDO 10

Oil Can Points

5.9 gals(22.3L)

Hydraulic Reservoir

4 qts(3.8L)

OE/HDO 30

OE/HDO 20

OE/HDO 10

Engine Crankcase (see note 4)

11 qts(10.4L)

OE/HDO 10

Transmission(see note 5)

Intervals

GO-LUBRICATING OIL, Gear

GO 85W/140

GO 80W/90

GO 75W

given in

5 pts(2.3L)

Drive Axle

hours of

GOS-LUBRICATING OIL, Gear, Sub-zero

normal

GAA-GREASE, Automotive and Artillery

ALL TEMPERATURES

operation

BFS-Silicone Brake Fluid

3 pts(1.4L)

Brake Master Cylinder

NOTES:

1. FOR OPERATION OF EQUIPMENT IN PROTRACTED COLD

5. TRANSMISSION. Add one quart(0.946L) when filter

TEMPERATURES BELOW -10F. Remove lubricants

is replaced.

prescribed in the key for temperatures above -10F.

Relubricate with lubricants specified in the key

6. LUBRICANTS. The following is a list of lubricants

for temperatures below -10 F(-18 C).

with the Military Symbols and applicable Specification

numbers: OE/HDOMIL -L-2104C, GO MIL-L-2105C,

2. OIL CAN POINTS. Every 50 hours lubricate the

HBA MIL-11-5606, GAA MIL-G-10924.

accelerator and parking brake linkage, mast inter-

lock, control valve linkage, pins and clevises and

all exposed adjusting threads with OE/HDO.

3. WHEEL BEARINGS AND BULL GEARS. Every 500 hours

remove wheels, clean and inspect all parts, replace

damaged or worn parts, repack bearings, and then

reassemble. Fill bull gear spaces to three-fourths

height of teeth with grease GAA.

4. ENGINE CRANKCASE. Add one pint(0.478L) when oil

filter is replaced.