|
|
TM 10-3930-644-14&P
Figure 28. Tightening Capscrews
Figure 27. Installing Meter Gear Star
4. Remove plugs and connect hydraulic hoses to
the steering valve.
E. INSTALLATION
5. Install floor and toe plates and secure with
1. Position steering valve unit in truck and install
attaching hardware.
attaching clamps and hardware.
F. PUMP PRESSURE ADJUSTMENT
2. Tighten bottom mounting hardware, then check
column alignment and tighten upper mounting
Refer to appropriate hydraulic pump in the HYDRAULIC
hardware.
SYSTEM, REPAIR MANUAL MODULE.
3. Connect horn button wire to the horn.
3-170
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |