TOPIC 3. MANIFOLD

TM 10-3930-644-14&P

TOPIC 3. MANIFOLD

A. DESCRIPTION

B. REMOVAL

The intake and exhaust manifold (Figure 3-1) is a one-

CAUTION

piece casting which serves as a collector for the

Be certain engine has cooled prior to

incoming fuel-air mixture and the outgoing exhaust

handling manifold, as severe burns

gases. The carburetor is bolted to the intake section of

could result from careless exposure.

the , manifold and the exhaust pipe is attached to the

exhaust manifold outlet flange.

Gaskets are used

Manifold can be removed with engine in or out of truck

between the manifold assembly and the cylinder block.

frame. The following procedure is recommended for

Unless cracked or broker, the manifold requires very

efficient manifold removal.

little attention.

Figure 3-1. Intake/Exhaust Manifold

R-104-1

3-5