| |
TM 10-3930-643-34
GENERAL SUPPORT
17-2.
Pressure
ASSEMBLY
BRAKE MAINTENANCE.
Converter (S/N 2001 to 2903). (Sheet 7 of 7)
37.
Position body (12) in a soft-jaw vice.
38.
Using a 1 1/8” open end wrench on
bushing (16), install items 31 thru 13
on body (12).
39•
Remove items 31 thru 12 from vice.
40.
Lubricate and install new preformed
packing (11) and indicator rod (10) to
body (12).
41.
Using a 11/16” open end wrench,
install new preformed packing (9) and
switch (8).
Tighten switch (8) to 6
lb-ft.
Switch must engage with groove
in indicator rod (10).
42.
Install new gasket (7), shell (6) and
six nuts (5) on items 31 thru 13 as an
assembly.
Tighten nuts (5) 9 lb-ft.
43.
Using 3/8” socket and socket wrench
handle, install bleeder valve (4) and
new cap (3) in body (12).
Tighten
bleeder valve (4) to 15 lb-ft.
44.
Using a 1-1/2” open end wrench,
install new ring (2) and cap (1) in
body (12). Tighten
lb–ft.
NOTE
Return M10A Forklift
equipment condition.
cap (1) to 70
to original
Go to sheet 8
17-15
|
