| |
TM 10-3930-643-34
GENERAL SUPPORT
17-2.
Pressure
DISASSEMBLY
9.
10.
11.
13.
14.
16.
17.
16.
17.
BRAKE MAINTENANCE.
Converter (S/N 2001 to 2903). (Sheet 3 of 7)
Using an 11/16” open end wrench,
remove nut (13), washer (14) and items
26 thru 31 as as assembly from rod
(25).
Remove spring (15).
Remove items 16 thru 19 as an assembly
from rod (25).
Remove and discard preformed packing
(17) and two seals (18) from bushing
(16).
Using snap ring pliers, remove ring
(19) in piston assembly (20) on end of
rod (25).
Discard ring (19).
Remove valve (21) from rod (25).
Remove regulating valve (22) from
valve (21).
Remove piston assembly (20) from rod
(25).
Remove seal (23) and retainer (24)
from piston (20).
Go to sheet 4
17-11
|
