| |
TM 10-3930-643-34
GENERAL SUPPORT PROPELLER
16-1.
Front Differential
ASSEMBLY (Cent)
49.
50.
51.
52.
53.
54.
55.
AND PROPELLER SHAFTS MAINTENANCE. (cont)
Carrier Assembly.
Lubricate O.D. of new seal (71) with
Permatex No. 2.
Install new seal (71) in cover (63).
Install shim (65) and items 75 thru
72 and 70 thru 66 as an assembly to
carrier (54).
Using a 9/16” socket and torque
wrench, install new gasket (64),
cover (63), two bolts (62), six
washers (61) and bolts (60).
Tighten
bolts (60 and 62) to 50 to 65 lb-ft
torque.
Install deflector (59).
Using rubber mallet, install yoke
(58).
Using a 1-1/2” socket and torque
wrench, install washer (57), nut (56)
and new cotter pin (55).
Tighten nut
(56) to 300 to 400 lb-ft torque.
(Sheet 9 of 13)
Go to sheet 10
16-10
|
