TM  10-3930-643-34 GENERAL  SUPPORT  TRANSMISSION  MAINTENANCE.  (cont) 15-7. Transmission Control Valve. (Sheet 9 of 9) ASSEMBLY  (cent) 43. 44. 45. 46. 47. 48. 49. Install washer (11), spacer (10), spring (9) and washer (8) in plunger (12). Using a 1/2” socket and socket wrench handle, install bolt (7). Hold plunger (12) in groove with locking pliers and tighten bolt (7). Do not hold plunger (12) on polished land surfaces. Using a 1-7/16” open end wrench, install  new  preformed  packing  (6)  and plug assembly (5) in housing (32). Lubricate items 12 thru 7 as an assembly  with  transmission  oil and install. Install  new  preformed  packing  (4)  in pin  (3). Install  pin (3)  in  plug  (l). Preformed packing (4) must be away from housing (32) end of plug. Using an 1-7/16” open end wrench, install  new  preformed  packing  (2)  and plug (1) in housing (32). NOTE Return M10A Forklift to original equipment  condition. END OF TASK 15-94