| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE. (cont)
15-7.
Transmission Control Valve. (Sheet 7 of 9)
ASSEMBLY (cont)
26.
Using snap
ring pliers,
install
retaining ring (26).
27.
Install new preformed packing (25) in
plug (20).
NOTE
l Install correct plug on each
plunger. Range plunger with
holes bored in lands uses longer
plug.
l Secure eye end of plunger in
soft jawed vise with plunger in
vertical position.
28.
Using a flat tip screwdriver, install
plug (24) in plunger (27).
29.
Install spring (23) and cam (22).
30.
Hold four balls (21) in position in
plunger (27) with one hand.
31.
Position plug (20) on end of plunger
(27).
32.
Push down over balls (21) with quick
downward movement.
33.
Lubricate items 27 thru 20 as an
assembly in housing (32) with clean
transmission oil and install into
valve bore.
34.
Using an 1-7/16” open end wrench,
tighten plug (20).
Go to sheet 8
15-92
|
