TM  10-3930-643-34 GENERAL  SUPPORT  TRANSMISSION  MAINTENANCE.  (cont) 15-6. Forward and Reverse Steering Gear Assembly. (Sheet 2 of 13) DISASSEMBLY 1. Using a flat tip screwdriver, remove and discard three seal rings (1) from shaft (40) at forward gear side. 2. Using snap ring pliers, remove and discard  retaining  ring  (2). 3. Remove bearing (3) and spacer (4). 4. Remove two washers (5) and thrust washer (6). 5. Using a gear puller, remove gear (7) from shaft (40). 6. Remove two bearings (8). 7. Using snap ring pliers, remove and discard  retaining  ring (9) from reverse gear side. 8. Remove bearing (10) and spacer (11). 9. Remove two washers (12) and thrust 5 bearing (13). 10. Remove 11. Remove (14). gear (14) from shaft (40). two bearings (15) from gear Go to sheet 3 15-74