| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE. (cont)
15-5.
Second and Third Gear Assembly. (Sheet 5 of 17)
DISASSEMBLY (cont)
18.
Using two C clamps, depress plate
(25) in second gear side.
Use care when removing retaining
ring.
Take care not to let
fingers inside housing in case C
clamps fail and plate tension is
released.
19.
Using a machinist’s scribe, remove
and discard retaining ring (24).
20. Remove “C” clamps from plate (25).
Wave springs are thin and have
sharp edges.
Use care when
handling them to avoid cutting
hands and fingers. If cut, seek
medical attention.
Use care when
removing
and
handling clutch plates.
Avoid
nicking or scratching
friction
surfaces.
21. Using long round nose pliers,
remove 15 plates (26), 14 plates
(27) and 28 wave springs (28).
Discard 28 springs (28).
Go to sheet 6
15-60
|
