| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE.
15-5.
Second and Third Gear Assembly. (Sheet 2 of 17)
DISASSEMBLY
2.
3.
4.
5.
6.
7.
Using snap ring pliers, remove and
discard retaining ring (1) from
second gear side.
Second gear side
has three oil holes in housing (40).
Third gear side has only one oil hole
in housing.
Using a gear puller, remove race (2)
and gear (3).
Remove gear (4).
Remove two races (5) and thrust
bearing (6).
Note thickness of races
for assembly references.
Remove gear (7).
Remove two bearings (8) from gear
(7).
Remove two races (9) and thrust
bearing (10).
Note that inner races
are thinner than outer races.
GO to sheet 3
15-57
|
