TM  10-3930-643-34 GENERAL  SUPPORT  TRANSMISSION  MAINTENANCE.  (cont) 15-3. Transmission  Assembly.  (Sheet  26  of  26) ASSEMBLY  (cont) 193. Install new preformed packing (8) in manifold (7). 194. Position manifold (7) on housing. 195. Using a 9/16” socket and socket wrench handle, install washer (6) and bolt (5). 196. Using a 3/16”   open  end  wrench,  install plug (9). 197. Using  a  1-1/4  socket  and  socket  wrench handle,    install  new  preformed  packing (11) and elbow (10). 198. Install  new  preformed  packing  (4)  and elbow (3). 199. Connect  hose  assembly  (15). 200. Install  new  preformed  packing  (2)  and adapter (1). 201. Connect hose assembly (98). 202. Using a 3/8”   socket head screw key and torque  wrench,  install  washer  (14), preformed packing (13) and screw (12) on  idler  shaft  (117).  Tighten  screw (12) to 50 lb-ft. NOTE Return  M10A  Forklift equipment  condition. to original END OF TASK 15-48