| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE.
15-3.
Transmission Assembly. (Sheet 9 of
DISASSEMBLY
52.
Using long round nose pliers, remove
snap
ring (113) from internal
transmission housing.
53.
Using a bearing puller, remove
bearing (114).
54.
Using a bearing puller, remove gear
(115) and spacer (116).
Use care when performing the next
procedure.
Do not let idler
shaft fall to ground.
Failure to
use care could result in damage
to idler shaft.
55.
Using a drift punch, drive items 117
thru 119 out through rear of
trans-
mission housing.
56.
Remove washer (121) and gear (122).
57.
Using a 3/4" socket and socket wrench
handle, remove bolt (118) and
preformed packing (119). Discard
preformed packing (119).
58.
Remove clutch pack (120).
For
disassembly of forward and reverse
clutch , refer to paragraph 15–6.
26)
Go to sheet 10
15-31
|
