| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE. (cont)
15-1.
Torque Converter. (Sheet 15 of 15)
ASSEMBLY (cont)
86.
Turn torque converter assembly over
with the output side up.
Use care when installing housing
(13) to avoid damage to output
yoke seal in housing by shaft,
86.
Using hoist and sling, position
housing (13) on torque converter
assembly.
87.
Using a 9/16" socket and torque
wrench, install six washers (12) and
bolts (11).
Tighten six bolts (11) to
38 lb-ft.
88.
Using a 3/4" socket and torque wrench,
install new preformed packing (10),
access cover (9) and four bolts (8).
Tighten four bolts (8) to 37 lb-ft.
89.
Install new gasket (7), access cover
(6) and four bolts (5).
90.
Install yoke (4) , new preformed
packing (3), washer
Tighten bolt (1) to
NOTE
Return M10A Forklift
equipment condition.
(2) and bolt (l).
77 to 85 lb-ft.
to original
END OF TASK
15-16
|
