TM 10-3930-643-34 GENERAL  SUPPORT  TRANSMISSION  MAINTENANCE. 15-1. Torque Converter. (Sheet 14 of 15) ASSEMBLY 80. Using a 1/2"   socket  and  socket  wrench handle  ,   install 24 new washers (21) and bolts (2o). Tighten 24 bolts (20) to 21 lb-ft. 81. Turn  torque  converter  assembly  over with the input side up. 82. If removed, install new spring pin (18) into washer (17). 83. Using a 3/4"   socket  and  socket  wrench handle  ,   install  washer  (17)  with spring pin (18) and bolt (16) to torque  converter  assembly,  input  side. 84. Apply liquid gasket to retainer (15). 85. Using a 9/16"   socket  and  socket  wrench handle, retainer (15) and six bolts (14). Tighten six bolts (14) to 37 lb-ft  . Go to sheet 15 15-15