| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE. (cont)
15-1.
Torque Converter. (Sheet 11 of 15)
ASSEMBLY (cont)
57.
Using a 9/16" socket and torque
wrench, install items 52 thru 55 as
an assembly and bolt (51) to housing
(18).
Tighten bolt (51) to 37 lb-ft.
58.
Install hub (50) and retaining ring
(49).
Bearing inner race must be sup-
ported during pressing operation.
59.
Using an arbor press, press retainer
(47) into bearing (46).
Be sure pressure from arbor press
is exerted on bearing outer race.
60.
Using an arbor press, press items 47
and 46 as an assembly into gear (48).
61.
Using snap ring pliers, install ring
(45).
Go to sheet 12
15-12
|
