| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE. (cont)
15-1.
Torque Converter. (Sheet 7 of 15)
DISASSEMBLY (cont)
34.
35•
36.
37.
38.
39.
40.
41.
Using a flat tip screwdriver, remove
ring (52) from gear (55).
Using an arbor press and hub (50),
press out items 53 and 54 as an
assembly from gear (55).
Using an arbor press, press out
retainer (54) from bearing (53).
Bearing (53) inner race must be
supported during pressing operation
to prevent damage to bearing (53).
Using a chisel and hammer, drive out
seal (56).
Discard seal (56).
Using a flat tip screwdriver, remove
ring (57) from housing (13).
Using a 1-1/2" socket and socket
wrench handle, remove plug (58) and
preformed packing (59). Discard
preformed packing (59).
Remove connector (60) and preformed
packing (61).
Discard preformed
packing (61).
Using a 9/16" open end wrench, remove
plug (62) from connector (6).
Go to sheet 8
15-8
|
