| |
TM 10-3930-643-34
GENERAL SUPPORT ENGINE, FUEL, EXHAUST AND COOLING MAINTENANCE. (cont)
13-14.
Turbocharger.
(Sheet 3 of 10)
DISASSEMBLY (cont)
7.
8.
9.
10.
11.
12.
13.
14.
15.
Using a 1/2” socket and socket wrench
handle, loosen four bolts (13). Turn
center housing (28) over and remove.
Remove two lockplates
(14) and
backplate (15).
Remove seal ring (16), thrust collar
(17) and thrust bearing (18).
Discard seal ring (16).
Using a small flat tip screwdriver,
remove spring (19) from
backplate
(15).
Remove and discard piston ring (20)
from thrust collar (17).
Remove and discard piston ring (21)
from center housing (28).
Remove retaining ring (22), bearing
(23) and retaining ring (24).
Discard retaining rings (22 and 24).
Using external snap ring pliers,
remove retaining ring (25),
bearing
(26) and retaining rings (27).
Discard retaining rings (25 and 27).
Cover intake and exhaust ports on
turbocharger assembly.
Go to sheet 4
13-88
|
