TM  10-3930-643-34 GENERAL  SUPPORT  ENGINE,  FUEL,  EXHAUST  AND  COOLING  MAINTENANCE.  (cont) 13-13. Fuel Solenoid. (Sheet 2 of 5) REMOVAL 1. Remove  engine  side  access  cover (1) from right side of engine compart- ment,  refer  to  TM  10-3930-643-20. 2. Using a 7/16” open end wrench, remove nut (2) and wire assembly (3) at terminal from right side of engine. 3. Using side cutters, cut, remove and discard lockwire (4). 4. Using a flat tip screwdriver, remove two screws (5), lock washers (6), screws (7), cover (8) and gasket (9). Discard  gasket. Remove all gasket material  from  mounting  surfaces. DISASSEMBLY 5. Using a 3/4” open end wrench, remove solenoid body (10), gasket (11), spring  (12),  plunger (13), washer (14) and ring (15) from cover (8). Discard gasket (11). Remove all gasket material  from mounting surfaces. Go to sheet 3 13-82