| |
TM 10-3930-643-34
GENERAL SUPPORT ENGINE, FUEL, EXHAUST AND COOLING MAINTENANCE. (cont)
13-12.
Fuel Injectors. (Sheet 4 of 4)
CLEANING/INSPECTION (cont)
Be extremely careful when handling
nozzle.
5.
Inspect
blocked
6.
Inspect
Tip is damaged easily.
nozzle (3) for damage
and
passages.
all other parts.
Refer to
paragraph 2-9.
ASSEMBLY
7.
8.
9.
Install spacer (6), spring (5) and
seat (4) in housing (7).
Install nozzle (3) and spacer (2) in
nut (l).
Position nut (1) on housing (7). Be
certain opening and
two pins on
spacer (2) aline with
nozzle (3).
Using a torque wrench, tighten nut
(1) to 33 lb-ft.
TESTING
10.
Test items 1 thru 7 as an assembly,
refer to paragraph 4-12.
NOTE
Return M10A Forklift
equipment condition.
to original
END OF TASK
13-80
|
