| |
TM 10-3930-643-34
ENGINE, FUEL, EXHAUST AND COOLING TROUBLESHOOTING AND MAINTENANCE. (cont)
4-3.
Engine Mounts. (Sheet 4 of 4)
INSTALLATION
7.
8.
9.
10.
Using a 1-5/16” socket and socket
wrench handle, install washer (17),
mount (16), support (15), mount (14),
washer (13), bolt (12), washer (11)
and nut (10) in frame of rear left
engine compartment.
Tighten bolt
(12) to 320 lb-ft.
Repeat step 7 for rear right engine
mount assembly.
Using a 15/16” socket and socket
wrench handle, install support (9),
two nuts (8), four washers (7) and
two bolts (6) on frame at front of
engine compartment.
Tighten bolt
(6) to 160 lb-ft.
Install front mount (5), two washers
(4), bolts (3), washers (2) and
bolts (1) on bottom front of engine.
Tighten bolts (3 and 1) to 160 lb-ft.
NOTE
Return M10A Forklift to original
equipment condition.
END OF TASK
4-28
|
