| |
GENERAL
13-11.
REMOVAL
TM 10-3930-643-34
SUPPORT ENGINE, FUEL, EXHAUST AND COOLING MAINTENANCE.
Engine Oil Pump. (Sheet 2 of 5)
1.
Using a 1/2” socket and socket wrench
handle, remove six lock screws
(1),
washers (2), housing (3) and
preformed packing (4) from front
cover.
Retain six lock screws
(1)
and preformed packing (4) to be used
for measurement of end clearance.
DISASSEMBLY
2.
Remove inner rotor (5), plate (6) and
preformed packing (7).
Discard
preformed packing (7).
3.
Remove outer rotor (8), seal (9) and
two pins (10)
from housing
(3).
Discard seal (9).
Go to sheet 3
13-73
|
