| |
TM 10-3930-643-34
GENERAL SUPPORT ENGINE, FUEL, EXHAUST AND COOLING MAINTENANCE.
13-10.
Oil Pump Inlet Tube. (Sheet 3 of 3)
INSTALLATION
5.
6.
Using 1/2 socket and socket wrench
handle, install new gasket (8), tube
assembly (7), two washers
(6) and
bolts (5).
Using a 9/16 socket, socket
wrench
handle and a 9/16 box and open end
wrench, install washer (4), bolt (3),
lock washer (2) and nut (1).
NOTE
Return M10A Forklift to original
equipment condition.
END OF TASK
13-71
|