TM  10-3930-643-34 GENERAL  SUPPORT 13-9. Camshaft ENGINE,  FUEL,  EXHAUST  AND  COOLING  MAINTENANCE. and Timing Gears. (Sheet 7 of 8) INSTALLATION 15. Using a 1/2” socket and socket wrench handle,  install  new  gasket (14), plate (13) and four bolts (12). 16. Using a 5/8” socket and socket wrench handle, install spacer (11), gear (10), bearing (9), shaft (8) and bolt (7). Use  asbestos  gloves  when  handling gear during installation to prevent severe burn injury. Temperature of gear is approxi- mately 400 degrees F. 17. Using an (5),  key (6). 18. Using a camshaft assembly arbor press, install plate (4) and gear (3) in camshaft rubber mallet, install (6) and items 6 thru 3 as an in front of engine. 19. Using a 1/2” socket and torque wrench, install two bolts (2). Tighten bolts (2) to 20 lb-ft. Go to sheet 8 13-67

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business