| |
TM 10-3930-643-34
GENERAL SUPPORT ENGINE, FUEL, EXHAUST AND COOLING MAINTENANCE.
13-9.
Camshaft and Timing Gears. (Sheet 3 of 8)
REMOVAL
NOTE
Crank engine until timing marks
on camshaft gear, idler gear and
crankshaft gear are alined, as
shown before removing camshaft.
Camshaft must be supported along
its length during removal to
prevent cam lobes from damaging
bearings.
2.
Using a 1/2” socket and socket wrench
handle, remove two bolts (2) in front
of engine,
3. Remove items 3 thru 6 as an assembly.
Go to sheet 4
13-63
|
