| |
TM 10-3930-643-34
ENGINE, FUEL, EXHAUST AND COOLING TROUBLESHOOTING AND MAINTENANCE. (cont)
4-3.
Engine Mounts. (Sheet 2 of 4)
REMOVAL
1.
Using a 15/16” socket and socket
wrench handle, remove two bolts
(1), washers (2), bolts (3), washers
(4) and front mount (5) from bottom
of engine.
2.
Remove two bolts (6), four washers
(7), two nuts (8) and support (9)
from frame.
3.
Using a 1-5/16” socket and socket
wrench handle, remove nut (10),
washer (11), bolt (12), washer (13),
mount (14), support (15), mount (16)
and washer (17) from frame in rear,
left engine compartment.
4.
Repeat step 3 for rear, right engine
mount assembly.
Go to sheet 3
4-26
|
