TM  10-3930-643-34 ENGINE,  FUEL,  EXHAUST  AND  COOLING  TROUBLESHOOTING  AND  MAINTENANCE. 4-2. Engine Assembly. (Sheet 9 of 10) INSTALLATION 44. 45. 46. 47. 48. Using a cross tip screwdriver, install  connector  (14a)  and  four screws  (14)  on  hydraulic  reservoir bulkhead  in  hydraulic  reservoir, beneath  battery  compartment. Using a 9/16”   open and box wrench, install plate (13c), four washers (13b) and bolts (13a). Connect  wire  assembly  connector  (13). Using  a  flat  tip  screwdriver,  connect hose assembly (12) oil pan and tighten hose clamp. Using a 3/8”   open  end  wrench,  connect wire assembly (11) to solenoid. Go to sheet 10 4-23