TM  10-3930-643-34 GENERAL  SUPPORT  ENGINE,  FUEL,  EXHAUST  AND  COOLING  MAINTENANCE.  (cont) 13-3. Crankcase  and  Cylinder  Sleeves.  (Sheet  11  of  11) ASSEMBLY  (cont) 47. Coat threads of plugs (8, 7 and 6) with Permatex #2. Using 7/16” and 3/16” sockets and socket wrench handle, install plugs (8 and 7) and five plugs (6). 48. Using a flat brass punch and hammer, install nine new plugs (5). 49. Using a flat brass punch and hammer, install three plugs (4). 50. Install ball bearing (3). 51. Using a flat brass punch and hammer, install four pins (2). 52. Using a flat brass punch and hammer, install  restrictor  (1). NOTE Return  M10A  Forklift equipment  condition. to  original END OF TASK 13-24