| |
GENERAL SUPPORT ENGINE, FUEL,
13-3.
Crankcase and Cylinder
ASSEMBLY
30.
310
32.
33.
34.
35.
36.
Install six sleeves (16)
TM 10-3930-643-34
EXHAUST AND COOLING MAINTENANCE.
Sleeves. (Sheet 8 of 11)
in engine
crankcase without 18 new packings
(18).
Clamp down one sleeve (16) using
three holding adapters,
bolts and
hardened washers.
Space the bolts to
obtain uniform pressure on sleeve.
Place a dial indicator with block
across cylinder sleeve.
With dial indicator set on the flange
of the sleeve, adjust indicator to
zero.
Move indicator block until pointer
drops to crankcase deck.
Record
reading.
If sleeve
is below deck, rest
indicator pointer on deck
and
set
indicator on zero.
Move the indicator block until the
pointer drops to he sleeve flange.
Take a reading.
Go to sheet 9
13-21
|
