| |
TM 10-3930-643-34
GENERAL SUPPORT ENGINE, FUEL, EXHAUST AND COOLING MAINTENANCE.
13-3.
Crankcase and Cylinder Sleeves. (Sheet 2 of 11)
DISASSEMBLY
1.
2.
3.
4.
5.
6.
7.
8.
9.
Using slip joint pliers, remove
restrictor (1).
Remove four pins (2).
Using a
(3).
Using a
magnet, remove ball bearing
punch and hammer, punch hole
in three plugs (4) and remove.
Remove and discard nine plugs (5).
Using a 3/16”
socket and socket
wrench handle, remove five plugs (6).
Using a 9/16” socket and socket
wrench handle, remove plugs (7 and
8).
Using a 1/2” socket and socket wrench
handle, remove two bolts (9), lock
washers (10), washers (11), cover
(12), gasket (13) and baffle (14).
Discard gasket (13).
Using slip joint pliers, remove two.
dowels (15).
Go to sheet 3
13-15
|
