| |
TM 10-3930-643-34
GENERAL SUPPORT ENGINE, FUEL, EXHAUST AND COOLING MAINTENANCE. (cent)
13-2.
Cylinder Head Assembly with Valves. (Sheet 3 of 6)
CLEANING/INSPECTION/ASSEMBLY
Dry cleaning solvent P-D-680, used
for cleaning parts, is toxic and
flammable. Use
only in
well
ventilated areas. Wear protective
goggles and gloves. Do not smoke
or allow open flames or sparks in
areas where cleaning solvent is
used or stored.
Avoid contact
with eyes, skin or clothing. If
contact with eyes is made,
flush
with cold water and seek
medical
attention immediately.
If contact
with skin or clothing is
made,
flush with cold water.
If you
become dizzy while using cleaning
solvent,
get
fresh
air
immediately.
Compressed air used for cleaning
purposes will not exceed 30 psi.
Use only with effective chip
guarding and personal protective
equipment (goggles/shield, gloves,
etc.).
4.
Clean counterbore with
cleaning
solvent P-D-680 and nylon brush.
Dry
thoroughly
with compressed
air.
Refer to paragraph 2-8.
Go to sheet 4
13-10
|