| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
12-19.
Hydraulic Reservoir and Filter. (Sheet 6 of 11)
DISASSEMBLY (cont)
24.
25.
26.
27.
28.
29.
30•
31•
32.
Using a 14" adjustable wrench, remove
indicator (44) and preformed packing
(45) from hydraulic reservoir (35).
Discard preformed packing (45).
Remove plug (46), plug cock (47),
adapter (48) and preformed packing
(49).
Discard preformed packing
(49).
Remove 16 key washers (50) and plates
(51 thru 54).
Using a drill, remove four rivets
(56), panel (57) and spring (58) from
panel (55).
Discard four rivets
(56) .
Panel (55) is removed during
battery removal procedure.
Remove two rivets (59) and latch (60
from panel (57).
Discard two rivets
(59).
Using a 5/8" and 1/2" socket and
socket wrench, remove bolts (61 and
62), tube assembly (15) and preformed
packing (63) from filter head
assembly (71).
Discard preformed
packing (63).
Using an 11/16" socket, socket wrench
handle and an open end wrench, remove
two locknuts (64), bolts (65), link
(66) and couplings (67 and 68) from
tube assembly (15).
Using a 1/2" socket and socket wrench
handle, remove four bolts (69),
washers (70), filter head assembly
(71) and preformed packing (72) from
hydraulic reservoir (35).
Discard
preformed packing (72).
Using a 1/4" socket and socket wrench
handle, remove two screws (73) and
filter indicator (74) from filter
head assembly (71).
Go to sheet 7
12-175
|
